Rode
Rode Wireless GO II digital 2-channel wireless microphone system
Rode Wireless GO II digital 2-channel wireless microphone system
- Rode Wireless GO II
- digital 2-channel wireless microphone system
- ultra-compact complete system with two transmitter modules
- RX receiver for clip-on or lightning shoe mounting
- built-in USB-C audio interface for digital signal output
- Battery capacity: 7 hours
- Charging via USB-C socket
- Rode Interview GO, handheld adapter
- to convert the Wireless Go module into a handheld microphone
- windscreen included
- Rode XLR3M-R Premium XLR red 3m microphone cable
- Canare cable
- Neutrik connector, XLR3-F to XLR3-M
- Collet-type cable strain relief
- gold-plated contacts, first-class shielding
- ultra-clean signal transmission
- incl. 2x Rode Velcro cable ties
- iOS directional microphone
- Polar pattern: cardioid
- compatible with iPhone 7/8/10 and other iOS devices with Lightning port
- integrated preamplifier with DA converter (24 bit/48 kHz)
- Frequency response: 20 Hz - 20 kHz
- Inherent noise: 19.5 dBA
- Limiting sound pressure level: 115 dB
- 3.5 mm headphone jack on the rear panel
- Aluminum housing with scratch-resistant ceramic coating
- incl. retaining clip and deluxe head windshield
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- Microphone
- ultra-compact and lightweight
- Directional characteristic: supercardioid
- high directivity to the front, angle of incidence approx. 45°
- Plug&Play - no battery required
- Full metal housing (aluminum) with scratch-resistant ceramic coating
- excellent shielding against interferences
- crystal clear, coloration-free sound with subtle presence enhancement
- innovative HELIX™ Isomount swing mount with hot shoe adapter
- integrated 3/8" thread for tripod or boom mounting
- analog 3.5 mm TRS output
- compact microphone
- Compact and lightweight (8 cm/42 g)
- Plug + Play - without battery
- Full metal housing (aluminum) with scratch-resistant ceramic coating
- HF shielding against interference
- Structure-borne noise decoupling thanks to Rycote®-Lyre® vibration mount
- Attachment to the camera via integrated standard hot shoe adapter
- 3/8" thread embedded in the base for tripod or boom pole mounting
- Connection cable with 3.5 mm TRS jack plug (double mono)
- Transmission range: 100 Hz - 20 kHz
- Sensitivity: 22 mV
- Self-noise: 20 dBA
- Maximum sound pressure level: 140 dB
- Rode Wireless PRO Professional Set (Transmitter/Receiver/Lav.Micro)
- Professional complete set
- wireless microphone system
- with two ultra-compact transmitters
- a 2-channel receiver
- two Lavalier II microphones and a charging case
- compatible. with cameras, iPhone, smartphone, Mac and PC (incl.4 cables)
- crystal clear professional sound quality
- Range: 260 m
- GainAssist
Omnidirectional lavalier condenser microphone, reinforced connection cable (1.2 m) with MiCon connector
Reliable clip-on condenser microphone with miniature capsule (4.5 mm), suitable for a wide range of applications, whether for television and radio, conferences, presentations, live on stage, at church services or for lectures of all kinds.
- Rode Podcaster MKII, white, USB speaker microphone
- professional, dynamic USB speaker microphone
- with heavy metal housing (610 g)
- dynamic cardioid capsule that is perfectly tuned to the sound of speech
- the capsule is installed horizontally, the podcaster is recorded from the front.
- Pop filter in the pickup basket
- Integrated USB audio interface
- Rode RODECaster Duo podcast studio
- Audio production studio - extremely low noise
- 2 Neutrik combo inputs
- integrated wireless receiver
- 7 channels with 4 physical fibers
- 3 virtual faders
- Aphex audio processing
- 6 fully programmable smart pads
- 3.5 mm TRRS input
- Dual USB-C, Bluetooth
- Rode VideoMic GO II Microphone
- Camera/USB directional microphone
- Polar pattern: Supercardioid
- Condenser shotgun microphone
- Transmission: 60Hz - 20kHz
- Connection: 3,5 jack
- integrated vibration mount
- 15dbA
- Limiting sound pressure level: 110 dB
- Self-noise: 15 dBA
- Sensitivity: 28.8 mV/Pa
- Output impedance: 2.2 kOhm
- Audio Interface: 2 In/2 Out (via USB)
- Digital conversion: 24 bit/48 kHz
- TRS connection cable
- incl. foam windscreen
- Rode Wireless GO II Charge Case
- Charging case
- suitable for three RODE Wireless GO II modules (2x transmitter TX and 1x receiver RX)
- Capacity: 4,200 mAh
- simultaneous and up to two complete charging of the modules possible
- USB-C connection
- Charging status LED
- Dimensions (LxWxH): 78x98x71 mm
- Clip-on microphone
- Professional-quality lavalier microphone with 3.5 mm TRS jack
- high-quality omnidirectional condenser capsule
- inconspicuous 4.5 mm miniature microphone
- Synthetic fiber reinforced cable
- includes pop shield, durable mounting clip and pouch
- Weight: 20 g
- Dimensions: (HxWxD): 30 x 10 x 170 mm
- 3 m extension cable with TRS connectors
- suitable for VideoMic/-Pro Rycote
- Stereo VideoMic Pro use on the sound boom Micro Boompoole
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
At the outside warehouse. Delivery time 4-6 working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is 4-6 working days.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
This item is ordered exclusively for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Currently not available
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.