Video monitors
Videographers are often in the situation that the built-in display of the camera is not sufficient. Gimbals or rigs are usually the cause here, as the camera is then carried in a remote position. Video monitors can be mounted in such cases with additional accessories, such as Magicarms, to display the image again. These products facilitate filming in many ways. A field monitor is connected to the camera via HDMI or SDI. The device then displays the live image with its own overlay. Functions such as focus peaking, zebras, histogram, waveform or 3D LUT can be activated here. When choosing a monitor, it is important to know which resolution and color profile should be displayed. When working in the profile area, cameramen / chambermaids are increasingly using flat image profiles such as S-Log3 or C-Log. These profiles are difficult to judge when filming. Current models from Atomos, Blackmagic and Small HD can convert the incoming signal back to REC 709 thanks to the HDR function to counteract these problems.
- Ultra-bright 7-inch monitor with radiant 2800 nits brightness
- Best view even when filming in the midday sun
- Touchscreen, custom function buttons and control wheel
- Full HD display with wide 170° viewing angle
- Signal transmission with loop out up to 4K60
- Integrated cooling and versatile power supply options incl. USB-C PD
- Screen, recorder, transmitter and receiver in one
- 5.5 inch + 1500 nits
- 1TX and 4RX + 400 m LOS range
- Camera control
- Proxy recording
- Pyro ecosystem
- Dual-band + low latency
- SDI + HDMI connections
- Viltrox DC-X3 - 6-inch camera monitor
- 6-inch touchscreen display: For optimum overview and convenient operation
- high resolution: Full HD resolution and brightness of 2,000 nits
- various connections: 4K HDMI in/out, NP-F, USB-C and much more.
- wide range of functions: False color, focus peaking, waveform and much more.
- flexible power supply: Via NP-F batteries, USB-C power bank or cable
- Shimbol Video Transmitter ZO600M
- wireless 5.5 inch touchscreen monitor
- both as a transmitter and receiver device
- stand-alone HDMI monitor
- Screen resolution: 1920 x 1080
- integrated recording function
- Teleprompter function
Free live consultation
Your individual consultation - from the comfort of your sofa
Arrange appointment- Viltrox DC 550 Pro
- 13.9 cm (5.25 inch) 4K HDMI touchscreen monitor
- 1920 x 1080 pixel resolution
- user-defined 3D LUTS
- Picture zoom function
- Audio: Headphone connection Ø: 3.5
- Viltrox DC-X2 - 6-inch camera monitor
- 6-inch touchscreen display: For optimum overview and convenient operation
- high resolution: Full HD resolution and brightness of 2,000 nits
- various connections: 4K HDMI In/Out, NP-F, USB-C and much more.
- wide range of functions: False color, focus peaking, waveform and many more
- flexible power supply: Via NP-F batteries, USB-C power bank or cable
- Hollyland Pyro 7
- 7-inch wireless monitor
- 2.4GHz/5GHz dual-band transmission
- remarkable transmission range of up to 400 m (1,300 feet)
- low latency of only 60 ms
- enables the export of video files via an external SD card
- Resolution: 1920 x 1200 pixels
- Aspect ratio: 16:9
- compatible: NP-F batteries optional
- LCD screen
- Multiple HDMI, AV ports with wide viewing angle
- Adopting advanced TFT HD screen, low power consumption and stable performance
- It can display the exposure and area accurately
- With headphone output
- 16: 9/4: 3 / full screen display
- It can be used for HDMI port, AV port and live view
- Powered by rechargeable batteries or AC outlet with AC / DC adapter
- It can display the HDMI video signal from the camera
- Hollyland Pyro 7 Video Transmission + Monitoring Kit
- 7-inch wireless monitor + Wireless Video Receiver + Wireless Video Transmitter
- 2.4GHz/5GHz dual-band transmission
- remarkable transmission range of up to 1,300 feet (400 m)
- low latency of only 60 ms
- enables the export of video files via an external SD card
- Resolution: 1920 x 1200 pixels
- Aspect ratio: 16:9
- compatible: NP-F batteries optional
- Kit consisting of the Hollyland Pryo 5 monitor, a Pyro S transmitter and a Pyro S receiver
- Pyro 5: monitor, recorder, transmitter and receiver in one
- 5.5 inch + 1500 nits
- Camera control
- Proxy recording
- Pyro ecosystem
- Dual-band + low latency
- SDI + HDMI connections
- Atomos Ninja 13.2 cm (5.2 inch)
- 4K HDMI monitor/recorder
- 13.2 cm (5.2 inch)
- on 2.5 inch SSD/HDD
- Resolution: 1920x1080
- 10 bit (8+2 FRC)
- Brightness: 1000nits
- 4K DCI, 6K RAW via HDMI, HDMI input/output
- actively controlled fan and heat sink
- Body: Aluminum with ABS plastic
- Professional video monitor
- enables professional monitoring
- supports 3D LUTs
- Recording in broadcast-quality 10-bit 4:2:2 ProRes
- enables recording in Blackmagic RAW with third-party cameras
- HDR support: HDR10, Hybrid Log Gamma
- two SD slots for UHS-II cards
- 7 inch with 1920 x 1200 pixels
- FEELWORLD 7-inch F7 PRO 3D LUT touchscreen
- 7 inch IPS FHD 1920×1080 touchscreen monitor
- Supports 3D LUT protocol on Rec.709 and user 3D LUT uploads
- Touch screen menu
- Full HD 1920×1200, high contrast: 1200:1
- 160° wide viewing angle
- Headphone jack
- Atomos Ninja Ultra 13.2cm (5.2 inch)
- HDMI Monitor/Recorder
- 13.2 cm (5.2 inch)
- on 2.5 inch SSD/HDD
- Resolution: 1920x1080
- 10 bit (8+2 FRC)
- Brightness: 1000nits
- 4K DCI, 8K RAW via HDMI, HDMI input/output
- actively controlled fan and heat sink
- Body: aluminum with ABS plastic
- 7" camera control screen G7 Pro with touchscreen
- up to 3000nits screen brightness, ideal for outdoor shoots
- 3G-SDI in/out and 4K HDMI in/out
- brilliant color reproduction with 1300:1 contrast ratio
- Control of many camera functions via the monitor
- optimized user interface
- Playback with 18-stage dynamic range
Meaning of the delivery status
Immediately available
The item is in stock and can be shipped at short notice.
The item is also in stock in our shop in Düsseldorf.
Delivery time (from-to) working days after receipt of payment
The item is not in stock in our inhouse warehouse and will be ordered from the external warehouse/manufacturer or disributor after you have placed an order. The expected delivery time is listed with the item.
Item has been ordered
The item has already been ordered from the manufacturer or distributor. The delivery time is usually between 1 week and 2 months. As soon as a more precise delivery time is known, we will publish the details on our website. After placing the order, you will be informed regularly about the delivery time.
Available at a specified date
The item has already been ordered from the manufacturer or distributor. We have been informed of the expected delivery date.
We are happy to order for you
The item is currently not in stock and will be ordered for you from the manufacturer or distributor after you have placed an order. The delivery time is usually between 1 week and 2 months. After placing the order, you will be informed regularly about the delivery time.
Item has been ordered. Delivery time 1-3 months
The item is currently not available. We were not given a delivery time. Experience shows that the expected delivery time is 1-3 months.
Goods have been ordered. Long delivery time expected. Pre-order now and secure your place on the waiting list.
The manufacturer or supplier cannot confirm a date, so we assume a waiting time of 2 to 9 months. You can still order the item and secure your place on the waiting list.
Please note: Despite updating our website regularly, it is possible that an item may be out of stock but shown as available for a short time, especially when orders are high. All information is therefore without guarantee. We will inform you immediately if there is a delay in the expected availability/delivery time. The availability information refers to an order quantity of 1. Availability may vary for higher order quantities.
